gauge
| Nom de l'objet : | gauge |
| Catégorie de l'objet : | T&E For Science & Technology |
| Sous-catégorie de l'objet : | Metalworking T&E |
| Numéro d'accession : | 1985.0032.0023 |
| Description : | 32.04 - Part of 985.32.01. and same as .03. 32.05. - .08 Four adjusting guides, steel, conically shaped, 5.5cm long x 4cm diameter, tapering from 4cm to 1.2cm at cone point. Each with a centre hole of 1.1cm to slide onto .03 and 04. Each has a thumb screw for setting on rods, 985.32.03 and .04. Weel used but tight and in good condition. 32.09. - 10. Thumbscrews, identical, 3.7cm x 2.5cm x 0.7cm, manufactured, oval shape thumb grip that is concave each side above threaded section. Mounted at wide end of steel cone for setting same on rod. Will fit in 985.32.05. - 08. incl. 32.11. - 12. Thumbscrew, steel, 3.5cm x 2.0cm x 0.5cm. Same size as 32.09. & .10., however, thumbgrip portion is different and appear to be hand made replacements and are similar to carriage bolts with hand flattened heads. Each fits into hole on side of base of conical guide to set position on rod. 32.13. - 14. Adjusting spring bolt, metal, copper appearance, 7.8cm long x 1.5cm diameter. Threaded on one end and the other is bent sideways from the main shaft for 2.1cm over 90 degrees to form a slight hook. A coil spring fits over the straight section of the bolt and abuts the bottom side of 985.32.15 & .16. Good condition. 32.15. - .16 Adjusting bolt thumb nut, fits 985.32.13 & 14. 1.8cm x 1.5cm diameter, copper colour, serrated sides of nut top for grip. 32.17. - 18. Alignment guage. 25.1cm x 35.8cm x 4.5cm. 'T' shaped, made of steel. Base is 'T' design with 0.5cm thickness. Calibrating marks on steel strap which is fastened securely to the centre of the base. Second piece of steel strap, also fastened to base with single rivet, has a marker and set screw. This piece can be moved over first strap and set with a thumb screw at various positions on the gauge. 32.19. - 20. Thumb set screws, 2cm x 1.4cm diameter. Serrated edge at top for grip. Fits 985.32.17 & 18. and used to set guage needle position. 32.21. Adjustable bar. Copper coloured, squared steel, 96.1cm x 3.8cm x 2.4cm. Extended it is 170cm long. 3 sections. 2 sections can be extended out from centre and positioned with thumb screws which are threaded through a metal holder attached to each end of the base bar. 32.22 - 23. Thumb set screws, 2.3cm x 1.4cm diameter. Serrated top edge for grip, attached to 985.32.21. Copper colour surface. |
| Département : | B.C. Heritage Branch |
| Établissement : |
Fort Steele Heritage Town
 Facebook-Fort Steele Heritage Town
 Twitter-Fort Steele Heritage Town
|
| Ville de l'établissement : | Fort Steele |
| Province de l'établissement : | British Columbia |
Coordonnées de cette page web
-
Pour proposer des corrections ou des mises à jour sur cette page, veuillez contacter directement le Réseau canadien d’information sur le patrimoine (RCIP).