Notice catalographique « Characterization [sic] the laser cleaning effects on sandstone from the Canadian Parliament Building »
- Titre
- Characterization [sic] the laser cleaning effects on sandstone from the Canadian Parliament Building
- Auteur ou éditeur
- Hu, Yuan
- Queen's University (Kingston, ON)
- Lieu de publication
- Kingston, ON
- Maison d'édition
- Queen's University
- Date de publication
- 2018
- Collation
- xiii, 157 pages : illustrations (chiefly colour), charts, tables ; 28 cm
- Série
- Queen's Master in Art Conservation
- Résumé
- Laser cleaning has been used in the rehabilitation and conservation program of the Canadian Parliament Buildings in order to remove the black crust on sandstone surfaces. This study was carried out to characterize the effect of laser cleaning on sandstone from the Canadian Parliament Buildings. First, characteristics of the sandstone and the black crust itself were studied using microscopy, x-ray fluorescence (XRF) spectroscopy, and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS). Two kinds of sandstone samples, Berea/Ohio sandstone and Nepean sandstone, were taken from the West Block of the Parliament Buildings for testing. The results showed that the black crust was a very thin layer covering the surface of the quartz grains and also filling the gaps between the quartz grains on the surface of the sandstone. The characteristic elements of the black crust were sulfur (S), calcium (Ca), iron (Fe), and lead (Pb). Copper (Cu) and chlorine Cl were detected in some samples. Gypsum in the black crust was confirmed by the back-scattered electron (BSE) images. The Fourier transform infrared (FTIR) spectroscopy results indicated that the organic materials of the black crust contained hydrocarbon oil. Second, surface morphology and elemental composition before and after laser cleaning were studied by microscopy, XRF, and SEM-EDS. The cleaning effect of three laser cleaning systems was discussed in terms of cleaning effectiveness and damage to the sandstone. The results showed that the black crust on the Berea/Ohio sandstone and the Nepean sandstone can be removed by using the LaserArt-100 Cleaning System, the main focus of the study, but that residues of the black crust were still found on the cleaned surface and caused the color of cleaned surface was darker than the fresh sandstone surface. Gypsum crystals were also identified on the cleaned surfaces. XRF and SEM-EDS results indicated that the characteristic elements of the black crust still existed in the residues. No direct damage was found on the cleaned surface. The results of the RILEM tests showed the water absorption rate of the cleaned Berea/Ohio sandstone was increased significantly after laser cleaning. The water absorption rate of the cleaned Nepean sandstone was a little higher than that of the black crust surface, which was near zero. The sandstone would be vulnerable to weathering caused by water when water absorption rate increased. Therefore, keeping some residues during the laser cleaning would benefit the long-term preservation of the sandstone surface because the residues can prevent water infiltration
- Notes
- Thesis (M.A.) -- Queen's University, 2018
- Langue
- English = Anglais
- Sujet
- Stone buildings - Conservation and restoration - Canada
- Stone buildings - Cleaning
- Sandstone buildings - Conservation and restoration - Canada
- Building stones - Deterioration
- Building stones - Biodegradation
- Building stones - Analysis
- Constructions en pierre - Nettoyage
- Constructions en pierre - Conservation et restauration - Canada
- Constructions en grès - Conservation et restauration - Canada
- Pierre à bâtir - Biodégradation
- Pierre à bâtir - Détérioration
- Pierre à bâtir - Analyse
- Lien au document en anglais
- http://hdl.handle.net/1974/25663
- Pays
- Canada
- Type de document
- Monograph = Monographie
- Localisation
- TH 4818 S75 H89 2018
- Clé
- 20060
- Collection
- Catalogue